995 atten

moog995 · utilities · schema v1

995 Attenuators (moogafakkin System 55/35 clone — categorized under Ports -> moogafakkin). Three independent passive variable ATTENUATORS, each input -> level knob (0..unity) -> output. Reduces control or audio amplitude (own-code per-channel gain, permissive). Beige moogafakkin faceplate (the intrinsic always-on look shared by the moogafakkin module family).

A clean-room recreation of the Moog 995 Attenuators — a passive panel of three independent 'turn it down' knobs. Each channel takes one input, scales it by a level pot from full mute (0) up to unity (1), and sends it to its own output — never boosting (a passive panel can only attenuate). There is no mixing, no summing, and no CV: three parallel, fully independent attenuators with no cross-talk. Mental model: three volume trims in one module, used to tame a hot oscillator, set a modulation depth (attenuate an LFO/envelope before it reaches a destination), or balance a signal — exactly what you reach for when a modulation is too strong.

the faceplate

3 inputs · 3 outputs · 3 params

inputs

id	cable	what it does
`in1`	audio	Channel 1 input — the signal (audio or CV) to be attenuated by the Att 1 knob. audio signal
`in2`	audio	Channel 2 input — attenuated by the Att 2 knob, independent of the other channels. audio signal
`in3`	audio	Channel 3 input — attenuated by the Att 3 knob, independent of the other channels. audio signal

outputs

id	cable	what it does
`out1`	audio	Channel 1 output = in1 × Att 1. Fully independent — no cross-talk with the other channels. audio signal
`out2`	audio	Channel 2 output = in2 × Att 2. audio signal
`out3`	audio	Channel 3 output = in3 × Att 3. audio signal

params

id	label	range	default	curve
`atten1`	Att 1	0..1	1	linear
`atten2`	Att 2	0..1	1	linear
`atten3`	Att 3	0..1	1	linear

controls

control	what it does
Att 1	Channel 1 attenuator, 0 (full mute) to 1 (unity — passes the input unaltered). It only attenuates; it cannot boost above the input level.
Att 2	Channel 2 attenuator, 0 (mute) to 1 (unity).
Att 3	Channel 3 attenuator, 0 (mute) to 1 (unity).

source

moog995.ts on GitHub.